Tips on how to Install Windows XP from Pen Drive without third party software
We have seen people looking for a simple solution to install Windows XP
from pen drive just like they can now install windows Vista , 7 and
windows 8.
Well, i know one such solution exactly and i use it personally. but i
never shared it though... so here it is , and i hope this will help.
Benefits:
- Takes less than 5 minutes to install OS.
- Image Based installation much similar to Vista, 7 and 8 installation.
- Tools used are from Microsoft.(ImageX).
So let's get started. i assume that you know computer and OS installation basics and have read the earlier article for preparing a bootable window Vista,7 or 8 Pen drive in previous post of my blog.
Let me explain first, given below are the steps that we will use for preparation.
Step1 : Prepare Window Vista, Window 7 or windows 8 Boot able pen drive Link -Boot able Pen drive ints
Step2 : Install windows XP on a a test pc.
Step3 : Capture Windows XP image from C: partition of test pc.(using imageX.exe)
Step4 : Once the image is captured, it can be used for installation on other desktops or laptops etc.
Objective: Install windows XP from a bootable (windows) pen drive.
Step 1: Click here(bootable instructions see previous post) and follow instructions to create a bootable windows installation drive.
Step 2: Install a fresh copy of windows XP on a desktop computer using
standard procedure. do not install any drivers or software. Shutdown
your computer after first restart.
Step 3: We will now need Microsoft ImageX
Imp Note :(Microsoft ImageX tool for windows.(download it from Microsoft site here) ImageX is a very tiny application which comes as part of WAIK (windows automated installation kit). download the latest iso file from the link here. its is a big image file but worth the download because we will use ImageX.exe for several different purposes. )
Time to capture the freshly installed windows XP image from C: partition. to do this follow the steps below.
- Copy ImageX to bootable pen drive created during the Step1.
- Boot from bootable pen drive
- On the setup screen Press Shift+F10 to open command prompt.
- Now from command prompt go to pen drive.
- Now Type command Imagex /capture C: C:\WinXP.wim "XP"
- The above step will capture windows XP image from c: drive and save it with a file name Winxp.wim
- the process will take around 10-15 minutes.
- once done you may normally restart the pc.
- next step is to copy winxp.wim from c: drive to Pen drive
and that's it!!, we are done creating a bootable pen drive that
can be used to install windows Vista, windows 7 or windows 8 and Windows
XP as well.
You might be wondering how to install windows XP? So here are the steps...
Explanation: to install windows XP on a fresh HDD, we will create a new partition and then after format it with
NTFS. next we will make that partition
active and
bootable.
Once done, next step would be to apply windows XP image captured
earlier to the newly created partition and finally, restart PC normally.
Objective: Install windows XP from a bootable (windows) pen drive.
Follow the steps below to create a new partition to install windows XP. (if you already have a partition created on the Hard drive.)
- Boot from Pen drive created earlier
- on the setup screen press Shift+F10 to bring up Command prompt
- Type Diskpart on command prompt
- Now type List disk, this will show all the Physical Hard disk drive and
other drivers attached to pc. find the disk corresponding to you HDD (in my case it is was Disk 1)
- type select disk 1
- now type create partition primary size=102400 MB
- now type format fs=ntfs quick
- now type active
- the step above automatically assigns drive letter to pen drive, but if it doesn't then you the next command.
- assign letter="C"
- now type exit
Step 2.
Installtion
Now using the same command prompt got to the pen drive wherein we have our WinXP.wim and imagex.exe file.
now from the command prompt type the following commands.
imagex /apply WinXP.wim 1 C:\
C: is the drive letter on which we you wish to install OS.
now patiently wait for process to finish up. it would take around a minute or 2. you
will be able to see the progress in the command prompt window.
Step 3.Adding boot information to Windows Partition.
using the command prompt, go to Pen drive and then Boot folder. In my case E: is the Pen drive letter and prompt looks like this.(instead of E: use your Pen drive letter)
E:\
E:\BOOT>
now type the following command
bootsect.exe /nt52 C:
Note: The above command will make the partition bootable with NTLDR.
Close all windows and restart pc normally, you will be greeted with windows XP logo....
Tips And while installing Win XP, if we change the priority of setup process
through task manager (Shift+F10 then type taskmgr and press enter) to
high then within 15 min Win-XP will install.
